Product overview: This product is designed according to the latest battery test standards such as Japanese Industrial Standard JISC 8714:2007, IEC62133-2013, etc., and simulates the forced internal short circuit test of the battery under certain ambient temperature conditions. The test box is made of stainless steel, and the temperature uniformity is good. Exhaust function (i.e. discharge test exhaust gas after the test is completed). The control system is a PLC touch screen menu operation, and the frequency of data collection can reach 100 times per second. At the same time, the test pressure, pressure holding time, measured pressure, battery voltage, battery temperature, pressure drop speed, etc. are set through PLC programming.

Product parameters: extruded table material: high-grade stainless steel plate, corrosion-resistant;

Indenter size: 10*10*5mm or 10*10*2mm

Capacity: 0-1000N

Unit conversion: kg, lb , N;

Test stroke: 0-100 mm (without fixture);

Stroke accuracy: ±0.05 mm;

Test speed: 0.1mm/S, that is, 6 mm/min (adjustable within 0~20mm/min);

Load resolution: 1/10,000;

Loading accuracy: less than ±0.5%; Temperature range of high and low temperature test chamber: 0 ~ 100°C;

Temperature display accuracy: ±0.5°C, temperature controller: TEMMI controller imported from South Korea;

Temperature uniformity: ±2°C;

Test box inner box size: 400*500*500mm(W*D*H); 

Heating time: 3°C/min (average temperature rise, non-linear no-load); 

Cooling time: 1°C/min (average cooling, non-linear no-load);

Power supply: 1∮, 220V/50HZ; 

Machine weight: about 220kg;